magtek card reader setup

Off Once enabled you must create your graphic and name it mps-swipe-overlay-portraitpng or mps-swipe-overlay-landscapepng depending on whether your kiosk head will be portrait or landscape or create both if the iPad is able to be turned. This video describes how to install your USB mag-stripe card reader for use with the OptionPay services.

Magtek Mini Swipe Card Reader Stone Edge Order Manager

Login to MaxGivings credit card processing website was likely sent to you via email When you first log in a pop-up box may display at the bottom of the browser screen similar to the following image.

. Click on the CARD SWIPER drop down and select the desired card reader. Wait for it to complete. MagTek Reader Configuration Program.

Install the card programming software. The MagTek iDynamo Card Reader is a credit card swiper that plugs into your iOS device via a Lightning connector. Click on Change Basic Reader Settings.

Click Start -- All Programs -- MagSwipe Configuration Utility. Once your card reader is connected to the computer login to IRIS and go to the BackOffice. The MagTek Reader Configuration Program is a suite of applications running on a variety of operating systems and is designed to leverage the MagTek RS2 web services for secure key injection and device configuration of MagneSafe readers.

MagTek I 1710 Apollo Court I Seal Beach CA 90740 I Phone. Download and Install the MagSwipe Configuration Utility. After the file has downloaded open it to install the software onto your computer.

Magnetic Stripe Reader Setup. Click the MSR tab. The iDynamo Card Reader does not support tap or PIN payment.

Click the Track Settings Tab. You will need special software to program your MagTek Mini USB card reader. Do not mount the.

Save your changes and plug the device into the USB port on your computer. Send the convert to HID code 01 10 00 to change the setting. Plug the credit card reader into your computer.

Download the MagTek configuration utility here. Click on the Home tab and select Manager Tools from the submenu. By running the.

Then click Settings and choose General Setup Options under General Settings. RUN the file 99510026exe instead of downloading. Set up custom graphics for the alert that appears when asking for a visitor to swipe their card.

Click Update to save your changes. The MagTek USB card reader is compatible with the following applications. The MagTek Mini comes preset with Track 1 and Track 2 prefixes and suffixes.

Click to expand the Merchant Account Processing Settings section. A green LED indicator on the top. Confirm that SEOM is configured identically to the internal settings of the device.

ClickOnce app the user can configure their device and. Ensure that you obtain the card reader from your payment processor so that it is properly encrypted. Download 99510026exe and install it.

MagTek currently only makes configuration software for Windows so you will not be able to install this on Mac OSX. 3 Send 02 to save the change. Plug the device into a USB port on the computer.

If you are prompted to install the MagTek driver select Run. Check the box next to Credit Card Swiper to enable. In Store Operations Manager on the Database menu point to Registers and then click Register List.

To enable the credit card swiper within your MINDBODY software. Mark the Magnetic stripe reader is enabled for this register type Port-Powered swipe readermsr in the OPOS device name field and then click OK. Connect the USB cable to a USB port on your PC.

------Select a Category------ Card Readers Instant Issuance Check Scanners PIN Pads Key Pads and Terminals OEM Magensa Services Support Services Qwantum Card Services. 562 546-6400 I Technical Support. Click Selected Reader Interface - check off USB and hit Continue.

Connect the Credit Card Swipe Reader to the computer. Select the Hardware tab. Connect your Magtek card reader to your Computer PC or Mac I nstalling the reader.

FOLLOW the Installation windows until complete. 2 Send the convert to Kyeyboard code 01 10 01 to open up the MSR. With this you can accept magnetic stripe cards EMV chip cards and contactless NFC payment transactions.

You can mount the reader with screws or fastening tape as described below. Select SYSTEM SET UP from the TOOLS drop down menu. Go to the Main Menu Settings System Functions Point of Sale Scanners tab and input the following track data.

Plugin in your USB Card Reader if you have not already. Send 02 to save the change. Click on the TOOLS button on the top LEFT of the screen.

Changing to the Device Mode. The Program may visually disappear for several minutes. MagTek I 1710 Apollo Court I Seal Beach CA 90740 I Phone.

Notes to SET UP for MAGTEK part 21040140 USB magnetic stripe keyboardHID reader for reading of OHIP cards Use WIndows DEMO program to send parameters to card reader found at. Setting up the MagTek iDynamo Card Reader. Choose the USB Swipe option.

Youll just need to plug the USB card reader directly into the computer that will be submitting transactions to Intuit. Select the POINT OF SALE tab from the LEFT side of the system set up window. MagTek Support View manuals download software watch videos find answers for any product.

Select a register and then click Properties. 562 546-6400 I Technical Support.

Wink Hardware Install Installing Magtek Card Reader Wink